Fujitsu ApeosPrint C4030 Reference Manual page 84

Item
[RAW]
[PostScript Wait Timeout]
[LPD]
Item
[Port Status]
[Port Number]
[Maximum Number of
Sessions]
[IPP]
Item
[Port Status]
[Added Port Number]
84
5 Device
Set when printer driver output protocol is ASCII format or binary
format.
Data is output as is, without any control by the Adobe
communication protocol.
When set to [Disabled], the time until the connection is
disconnected when printing data follows [Auto Eject Time].
If set to [Enabled], the time complies with the PostScript timeout.
Note
 Set [Adobe Communication Protocol] to [RAW].
Set to [Enabled] to use LPD.
Set port number used with LPD.
Set maximum number of clients that can be connected
simultaneously to the machine with LPD.
Set to [Enabled] to use IPP.
This is set when printing via the Internet using IPP (Internet Printing
Protocol).
Set so that IPP is received at a non-standard port number.
Description
Description
Description