Fujitsu ApeosPrint C4030 Reference Manual page 178


If [Original Size] is [Auto Detect] and [Zoom Mode] is [Coordinate Area]
Reduction rate is determined by the starting point of the drawn object area and paper size. Hard Clip
area is [Normal].
Maximum scale value is 210.0%, and the minimum scale value is 22.5%.
Paper
size
Minimum value
P2x -
P1x
A4 5485
A5 3828
JIS B5 4723
Unit: Plotter unit
Items
In the table below, "ESC" of Item Number column stands for ESC/P, "PCL" for PCL, and "HP" for HP-
GL and HP-GL/2.
Note
You can set the items also in Internet Services.

Item
Document size
178
10 Appendix
0°
Maximum value
P2y - P2x -
P1y P1x
3828 51200
2648 35733
3297 44088
Item Number
ESC PCL HP
1 - -
Minimum value
P2y - P2x -
P1y P1x
35733 3828
24720 2648
30773 3297
Specification value
[0]: Postcard
[3]: A3
[4]: A4
[5]: A5
[14]: JIS B4
[15]: JIS B5
[21]: 8.5 x 14"
[22]: 8.5 x 13"
[23]: 8.5 x 11"
[24]: 11 x 17"
[99]: Paper size
[100]: Continuous paper (10 x 12")
[101]: Continuous paper (10 x 11")
[102]: Continuous paper (15 x 12")
[103]: Continuous paper (15 x 11")
Note
If continuous paper is specified, you cannot specify

"paper position".
90°
Maximum value
P2y - P2x -
P1y P1x
5485 35733
3828 24720
4723 30773
P2y -
P1y
51200
35733
44088