Fujitsu ApeosPrint C4030 Reference Manual page 161

Symptom
[Printing.] is displayed
even though no print job is
directed
(when using the USB
interface).
Top section of printed
document is missing.
Images are not printed at
desired positions.
Smart Card Registration Trouble
Error Code
-
001, 003, 004, 007, 008,
009, 011, 012, 013, 017,
019, 035, 036, 051, 052,
053, 054, 065, 066, 067,
070, 071, 076, 080, 083,
084, 085, 086, 090, 092,
093, 094, 095, 097
002, 033, 089
087
016, 018, 032, 048, 049,
150, 151
021, 034
If you have switched on the computer power after switching on the
machine power, cancel printing.
Adjust the paper guides to the correct positions.
Check whether the paper margin setting is correct with your printer
driver.
Adjust the print position in
Quality] > [Adjust Paper Registration].
When a message that the user ID or password is incorrect appears,
check the entered information and try again.
Check if the LDAP server used for Login to Remote Accounts is set up
correctly.
Check the Active Directory settings.
Check if the LDAP server used for Login to Remote Accounts is set up
correctly.
Check if the LDAP server used for Login to Remote Accounts is set up
correctly.
Check that [Attribute of Entered User Name] or [Attribute of Login
User Name] is correct.
Check the user ID and password and then enter them again.
Check if the LDAP server used for Login to Remote Accounts is set up
correctly.
Check if the information of the corresponding user is registered to
Active Directory.
Check if the user is a valid user in Active Directory.
Check if the password has been expired in Active Directory.
If the password must be changed at initial login as configured in Active
Directory, access to Active Directory from a device such as a computer
to change the password.
Check the user ID and password and then enter them again.
Check if the LDAP server used for Login to Remote Accounts is set up
correctly.
Check if the password has been expired in Active Directory.
If the password must be changed at initial login as configured in Active
Directory, access to Active Directory from a device such as a computer
to change the password.
Cause/Remedy
> [Device] > [Maintenance] > [Image
Remedy
8.2 Troubleshooting
161