Table of Contents
Advertisement
Message
lights up red in the
display and an alarm
also sounds.
Frequently asked questions
Possible cause and solution
There is a power failure: The temperature in the appli-
ance over the last few days or hours has risen too
high because of a power failure or interruption to the
power supply.
Tap
.
The fault message is confirmed:
goes out and the alarm stops.
The warmest temperature recorded in the refrigera-
tion appliance will flash for about 1 minute in the dis-
play. Then the temperature display will change to the
current temperature.
You can exit from the flashing temperature display
early:
Touch the temperature display.
The warmest temperature display will disappear. The
display will then revert to showing the current tem-
perature. The appliance will go back to the last tem-
perature setting when the power is restored.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. If it has, cook it
before freezing it again.
73
Advertisement
Table of Contents
