Table of Contents
Advertisement
Check and pay attention to the follow-
ing before switching the ice maker on:
- The ice maker must be clean.
- The refrigeration appliance must be
switched on.
- Ice cubes can only be made when
the ice cube drawer is completely
closed.
- There is a clip-on container at the top
of the ice cube drawer. If you ever
need a larger quantity of ice cubes,
you can simply remove the clip-on
container. The ice maker then auto-
matically produces ice cubes until the
maximum fill level in the ice cube
drawer is reached.
Risk to health due to contami-
nated water.
Bacteria can develop in water which
has been sitting in the water-supply
lines for too long. This poses a risk to
your health.
Throw away the first 3 batches of ice
cubes made after the ice-cube
maker is started up, as the water will
have been used for the initial rinsing
of the water-supply line.
This applies to the initial commis-
sioning as well as when using the
ice-cube maker again after it has
been switched off for an extended
period of time (more than 5 days).
Making ice cubes
When using the appliance for the first
time, it can take up to 24 hours for the
first ice cubes to drop out of the ice
maker and collect in the drawer.
After the ice maker has been turned
off and on again, it can take up to
6 hours for this process to be com-
pleted.
Only make normal domestic quantities
of ice cubes with the ice maker.
The ice maker can make up to approx.
2.6 lb (1.2 kg) of ice cubes in 24 hours.
The amount of ice cubes made by the
appliance depends on the temperature
in the freezer section. The lower the
temperature, the more ice cubes
are produced in a certain period of
time.
55
Advertisement
Table of Contents
