Removing the drawers and glass
shelves on telescopic runners
The magnet on the drawer is impor-
tant for the proper functioning of the
ice maker.
Do not remove the magnet.
Pull out the drawer as far as it will go
and then lift it up and out.
Push the telescopic runners back in
again to avoid damaging them.
Pull the glass shelf and telescopic
runners out.
To remove the telescopic runners:
1. Push the catch upward.
2. Push the telescopic runner to the
side.
3. Then pull the telescopic runner off to
the rear.
Pull off the protective trim at the front
and back of the shelf.
After cleaning the shelf, reattach the
protective trim.
Cleaning and care
To attach the telescopic runners to
the shelf:
1. Hook the telescopic runner on at the
rear.
2. Then clip the catch into position at
the front.
Reinserting the drawer
Insert the glass shelf together with
the telescopic runners in the freezer
section.
Slide the drawer onto the fully re-
tracted telescopic runners.
61