Table of Contents
Advertisement
How to save energy:
Installation
The refrigeration appliance has to cool more often at higher am-
location
bient temperatures and consumes more energy in the process.
Therefore, you should:
- Install the refrigeration appliance in a well-ventilated room.
- Do not install the refrigeration appliance near to a heat source
- Protect the refrigeration appliance from direct sunlight.
- Ensure an ideal ambient temperature of 68°F (20°C).
- Clean the ventilation gaps on a regular basis to remove any
Temperature
The colder the temperature, the higher the energy consumption.
setting
The following settings are recommended:
- 0°F (-18°C) in the freezer section.
Use
Energy consumption is increased by heat input and impeded air
circulation. Therefore, you should:
- Only open the appliance door(s) when necessary and for as
- Always close the appliance door(s) properly after opening
- Allow hot food and drinks to cool down before placing them in
- Store food well packaged or covered.
- Do not overfill the compartments to allow air to circulate.
- Keep drawers and shelves arranged as they were when the
- When placing food in the appliance, make sure that the venti-
(heater element, range).
dust.
short a time as possible. Arrange the food in such a way that
makes it easy to find in the appliance.
them.
the refrigeration appliance.
appliance was delivered.
lation slots are not blocked.
Saving energy
31
Advertisement
Table of Contents
