Water Connection; Information On The Plumbed-Water Connection - Miele FNS 7794 E Operating Instructions Manual

Table of Contents

Advertisement

Installation

Water connection

Information on the plumbed-water
connection
Risk of injury and appliance
damage if appliance is not con-
nected properly.
Failing to connect the appliance
properly can result in personal injury
and/or material damage.
The appliance may only be con-
nected to the plumbed-water con-
nection by qualified specialists.
Disconnect the refrigeration ap-
pliance from the power supply before
connecting it to the water supply.
Close the shut-off valve before con-
necting the refrigeration appliance to
the water supply.
WARNING! Risk to health and
risk of damage due to contaminated
water!
The quality of the incoming water
must conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
Connect the refrigeration appliance
to the drinking-water supply.
This appliance meets the requirements
of IEC 61770 and EN 61770.
26
Connection to the water supply must
comply with the applicable regula-
tions in the country where the appli-
ance is being installed. All appliances
and systems used to supply water to
the refrigeration appliance must also
comply with the applicable regula-
tions in the respective country.
For correct functioning (dispensing rate,
size of ice cubes, noise level) the water
connection pressure needs to be be-
tween 21.7 psi and 90 psi (1.5 bar and
6.2 bar).
If the water connection pressure ex-
ceeds 90 psi (6.2 bar), a pressure re-
ducing valve must be fitted.
The water supply line and the inlet sole-
noid valve on the refrigeration appliance
are suitable for a water connection
pressure of up to 145 psi (10 bar).
Use fresh water to ensure that the
quality of the ice cubes remains high.
Connect the hose to the fresh water
supply and avoid connection to a
water supply in which the water
might stagnate.
Only use the hose supplied. The
hose must not be shortened, ex-
tended, or replaced by a different
hose. Dispose of old hoses.
The hose must only be replaced by
an original Miele spare part. The
food-grade hose is available to order
from the Miele online shop, from
Miele Customer Service, or from your
local Miele dealer.

Advertisement

Table of Contents
loading

Table of Contents