Table of Contents
Advertisement
4.5
Analyzers for operation in hazardous areas
4.5.1
General remarks on connecting
①
②
③
Figure 4-4
For all field devices, the left half of the enclosure contains the electronics unit
the analyzer section
device. To do this, unscrew the spring bolts
remove the screws by hand.
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
Compact Operating Instructions, 09/2018, A5E45779389002-01
Electronics unit
Terminal block for electric connections
Cable glands
ULTRAMAT 6F, enclosure open
⑤
. To make the connections, you must open the enclosure of the field
4.5 Analyzers for operation in hazardous areas
④
Sample gas inlet
⑤
Analyzer section
⑥
Spring bolts (example; total of 8 for the two
parts of the enclosure)
⑥
until you feel the spring pressure. You can then
Connecting
①
, the right half
35
Advertisement
Table of Contents
