Product Identification; Scope Of Delivery - ABB EBN861 Operating Instruction

12 EBN853 / EBN861 ELECTRONIC UNIT | OI/EBN853/EBN861/EX-EN REV. C

4 Product identification

1 Full type designation
2 Manufacturing number
3 Power supply
4 Permissible mains frequency
5 Ambient temperature range
6 Specifications for external fuse
protection
Figure 4: Hardware name plate (example)
1 Associated Contrac control
actuator
2 Nominal torque or rated
actuator strength / set speed
3 Manufacturing number
Figure 5: Software name plate (example)
7 Manufacturer address
8 CE mark
9 IP rating
0 Maximum power consumption
k Year of manufacture
l NL no. (for no-list design)
4 NL no. (for no-list design)
5 Installed software version
6 Free for customer-specific
information
Note
In electronic units which can be separated for assembly, the
name plate for the hardware is located on the lower part of the
electronic unit (Figure 1). The name plate for the software
(Figure 2) and an additional name plate for the hardware (Figure
3) are located on the electronic unit cover.
The lower part of the electronic unit and the electronic cover are
independent assemblies, therefore the respective
manufacturing numbers can differ.
1 Full type designation
2 Manufacturing number
3 Ambient temperature range
4 Manufacturer address
Figure 6: Additional name plate for hardware (example)

Scope of delivery

• Metric tap holes for cable entries with IP 66 sealing plugs.
5 CE mark
6 IP rating
7 Year of manufacture
8 NL no. (for no-list design)