Connection Examples - ABB EBN861 Operating Instruction

EBN853 / EBN861 ELECTRONIC UNIT | OI/EBN853/EBN861/EX-EN REV. C

Connection examples

Operation following a continuous set point (standard)
In the standard configuration, the binary inputs are configured as 'MANUAL OPERATION'.
To switch the actuator to automatic mode (AUT), the following conditions must be met:
• The binary input 1 must be connected with +24 V DC (automatic operation).
• The 'AUT' operating mode must be selected through the graphic user interface.
Figure 13: Connection example for operation following a continuous set point (standard configuration)
25