Spare Parts And Accessories; List Of Spare Parts; Product Quality And Environmental Protection - ABB V-Contact VSC Series Installation And Service Instructions Manual

Hide thumbs Also See for V-Contact VSC Series:
Table of Contents

Advertisement

8. Spare parts and accessories

To order contactor spare parts/accessories, refer to technical
catalogue 1VCP000165 and always state the following:
– type of contactor
– rated voltage of the contactor
– rated normal current of the contactor
– serial number of the contactor
– rated voltage and frequency of any electrical spare parts.
For availability and to order spare parts, please contact ABB
Service.
9. Product quality and environmental
protection
The pieces of apparatus are produced in compliance with the
requirements of the international standards regarding quality
and environmental management systems. In these fields, the
excellent level is proved by availability of the ISO 9001 and
ISO 14001 certificates.
End of product life
ABB is committed to respecting the requirements and laws for
protection of the environment laid down according to the ISO
14001 Standard.
Material
Metals (Fe, Cu, Al, Ag, Zn, W, others)
Thermoplasts
Epoxy resin
Rubber
Dielectric oil (oil for transformers)
Wood for packing
Aluminium foil for packing
44

8.1. List of spare parts

– Vacuum interrupter assembly (replacement to be carried out
by ABB)
– MAC-R2 electronic card
– Auxiliary contacts (5 normally open and/or 5 normally
closed)
– Capacitor
– Interfacing shaft (only fixed contactors)
– 12 kV insulation partitions (only fixed contactors)
– Actuator assembly (replacement to be carried out by ABB).
– Operation counter
– Fuses
– Adapters for fuses
– Fuseholders (replacement to be carried out by ABB)
– Tulip and jaw-type isolating contacts
– Locking magnet in the truck
– Microswitches.
ABB offers its competency and collaboration in facilitating
recycling and disposal of the products at the end of their
life. It is always necessary to act in compliance with the local
regulations in force for disposal of the products.
Methods of disposal
Disposal can either be carried out with thermal treatment in an
incineration plant or by storage in special areas
Recommended method of disposal
Separation and recycling
Recycling or disposal
Separation of metal parts and disposal of resin parts
Disposal
Recovery and recycling or disposal
Recycling or disposal
Recycling or disposal
NEPSI.COM - Northeast Power Systems. Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V-Contact VSC Series and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF