Using The Water Dispenser; Filling The Water Dispenser's Tank - Blomberg KGM4881 User Manual

Table of Contents

Advertisement

Using the water dispenser

* May not be available in all models
C
It is normal for the first few
glasses of water taken from
the dispenser to be warm.
If the water dispenser is not
C
used for a long period of time,
dispose of first few glasses of
water to obtain fresh water.
1. Push in the lever of the water
dispenser with your glass. If you are
using a soft plastic cup, pushing the
lever with your hand will be easier.
2. After filling the cup up to the level
you want, release the lever.
C
Please note, how much
water
dispenser depends on how
far you depress the lever. As
the level of water in your cup
/ glass rises, gently reduce
the amount of pressure on
the lever to avoid overflow. If
you slightly press the arm, the
water will drip; this is quite
normal and not a failure.
flows
from
the
Filling the water dispenser's
tank
Water tank filling reservoir is located inside
the door rack.
1. Open the cover of the tank.
2. Fill the tank with fresh drinking water.
3. Close the cover.
Do not fill the water tank
C
with any other liquid except
for water such as fruit juices,
carbonated
alcoholic drinks which are not
suitable to use in the water
dispenser. Water dispenser
will be irreparably damaged
if these kinds of liquids are
used. Warranty does not
cover such usages. Some
chemical
additives contained in these
kinds of drinks/liquids may
damage the water tank.
C
Use clean drinking water
only.
C
Capacity of the water tank is
3 litres; do not overfill.
19
EN
beverages
or
substances
and

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kgm4881px

Table of Contents