Clearing The Hopper Screen; Using The Drive-Wheel Release Valves; Transporting The Machine - Toro 74312 Operator's Manual

Clearing the Hopper Screen

Remove the screen by firmly lifting the screen handles
(Figure 24).
Pull the screen toward the back to remove it. As
needed, gently tap the screen to remove debris.
Note:
Excessive buildup on the screen can cause
the blower to plug.
Note:
In conditions where the screen clogs quickly,
you can turn and install the front removable screen
panel under the primary screen to allow free air flow
from the hopper.
Figure 24
1. Front removable screen
can be rotated and stored
for wet conditions.
2. Front removable screen
Using the Drive-Wheel
Release Valves
WARNING
Hands may become entangled in the rotating
drive components below the engine deck,
which could result in serious injury.
Shut off the engine, remove the key, and wait
for all moving parts to stop before accessing
the drive-wheel release valves.
WARNING
The engine and hydraulic drive units can
become very hot. Touching a hot engine or
hydraulic drive units can cause severe burns.
Wait for the engine and hydraulic drive units
to cool completely before accessing the
drive-wheel release valves.
The drive-wheel release valves are located on the top,
left, front corner of the hydrostatic pumps.
g025244
3. Primary screen
4. Handles
1. Move the speed-control lever to the N
position to stop the machine.
2. Disengage the PTO lever, engage the parking
brake, shut off the engine, and wait for all
moving parts to stop.
3. Tilt the seat up to gain access to the pumps.
4. Rotate both release valves 1 turn
counterclockwise to release the drive
system.
Note:
This allows the hydraulic fluid to bypass
the pump, enabling the wheels to turn.
5. Disengage the parking brake before pushing
the machine.
Note:
Do not tow the machine.
6. Rotate the valves clockwise to run the machine.
Note:
Do not overtighten the valves.

Transporting the Machine

Use a heavy-duty trailer or truck to transport the
machine. Ensure that the trailer or truck has all
necessary brakes, lighting, and marking as required
by law. Please carefully read all the safety instructions.
Knowing this information could help you, your family,
pets, or bystanders avoid injury.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving vehicle emblem is dangerous
and can lead to accidents causing personal
injury.
Do not drive the machine on a public street
or roadway.
1. If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Load the machine onto the trailer or truck.
4. Shut off the engine, remove the key, set the
brake, and close the fuel valve.
5. Securely fasten the machine to the trailer or
truck with straps, chains, cable, or ropes down
and outward from the machine.
27
EUTRAL