Toro 74947 Operator's Manual page 41

Figure 49
Changing the Engine Oil
Service Interval: After the first 8 hours
Every 100 hours (more often in dirty or dusty
conditions).
Note:
Dispose of the used oil at a recycling center.
1. Start the engine and let it run for 5 minutes.
g008804
Note:
This warms the oil so that it drains better.
2. Park the machine so that the rear is slightly
lower than the front to ensure that the oil drains
completely.
3. Disengage the blade-control switch (PTO), move
the motion-control levers to the N
position, and set the parking brake.
4. Stop the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position
g194611
41
EUTRAL
(Figure 50).
Figure 50
-
LOCK
g008804
g027734