(1) 3-point frequency jump (Pr.31 to Pr.36)
Frequency jump
Pr. 36
Pr. 35
Pr. 34
Pr. 33
Pr. 32
Pr. 31
Pr. 34: 35Hz
Pr. 33: 30Hz
Pr. 33: 35Hz
Pr. 34: 30Hz
REMARKS
During acceleration/deceleration, the running frequency within the set
area is valid.
If the setting ranges of individual groups (1A and 1B, 2A and 2B, 3A
and 3B) overlap, Er1 (write disable error) will occur.
Up to three areas may be set, with the
The value set to 1A, 2A or 3A is a jump
Example 1
To fix the frequency to 30Hz in the range of 30Hz to
35Hz, set 35Hz in Pr.34 and 30Hz in Pr.33.
Example 2
To jump the frequency to 35Hz in the range of 30Hz to
35Hz, set 35Hz in Pr.33 and 30Hz in Pr.34.
2/4
jump frequencies set to either the top or
bottom point of each area.
point, and operation in the jump zone is
performed at these frequencies.
BCN-C22005-652