Installing The Grass Basket - Toro 04861 Operator's Manual

2
Installing the Transport
Wheels
Optional
Parts needed for this procedure:
Transport Wheel Kit (order separately; contact your
1
authorized Toro distributor)
Procedure
To install the transport wheels, you must first acquire
the Transport Wheel Kit (Model 04123). Contact your
authorized Toro distributor for this kit.
1. Install the transport wheels; refer to
the Transport Wheels (page
2. Ensure that the tires are inflated to 83 to 103
kPa (12 to 15 psi).
3

Installing the Grass Basket

Parts needed for this procedure:
1
Grass basket
Procedure
1. Grasp the basket by the handle.
2. Guide the basket lip between the cutting unit
side plates and over the front roller
Installing
20).
(Figure 4).
7
1. Basket hooks
3. Install the basket hooks over the frame loop
(Figure 4).
Important:
If you drop the basket, examine the
pitch-arm contact points near the lower lip of the
basket for damage (Figure
before using the basket.
Using the basket with bent pitch-arm contact
points may cause contact between the basket
and cutting unit, causing undesired noise and/or
damage to the basket and cutting unit.
1. Pitch-arm contact point
Figure 4
5). Straighten them
Figure 5
g308471
g032408