Safety; General Safety; Safety And Instructional Decals - Toro 04861 Operator's Manual

Safety

This machine has been designed in accordance
with ANSI B71.4-2017, IEC 60335-1:2012, and IEC
60335-2-29:2016 and meets these standards when
you complete the setup instructions.

General Safety

This product is capable of amputating hands and feet
and of throwing objects.
•
Read and understand the contents of this
Operator's Manual before starting the machine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
1. Warning—stay away from moving parts, keep all guards
and shields in place.
1. Warning—read the
Operator's Manual.
2. Warning—keep at
temperatures below 65° C
(149° F).
120-9570
133-8061
137-9712
3. Explosion hazard—do not
open the battery; do not
use a damaged battery.
4. Warning—read the
Operator's Manual
for battery charging
information.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep bystanders and children out of the operating
area. Never allow children to operate the machine.
•
Shut off the machine, remove the key (if equipped),
and wait for all movement to stop before you leave
the operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
decal120-9570
1. Rotate the handle to
decal133-8061
engage.
2. With the machine in the
Neutral position, rotate the
handle to disengage.
decal137-9712
4
, which
138-1644
3. Transmission control
decal138-1644