Operating Tips - Toro 04861 Operator's Manual

Settings Menu
Menu Item Description
Language Use this setting to change the language used
on the InfoCenter.
Units Use this setting to change the units used
by the InfoCenter. The menu choices are
English and Metric.
LCD Backlight Use this setting to increase or decrease the
brightness of the LCD display.
Use this setting to change the contrast
LCD Contrast
between the dark and light areas of the LCD
display.
About Menu
Menu Item Description
Model
Lists the model number of the machine.
SN Lists the serial number of the machine.
S/W Rev Lists the revision number of the machine
software.
Note:
If you inadvertently change the language
or contrast to a setting where you can no longer
understand or view the display, contact your
authorized Toro distributor for assistance in resetting
the display.

Operating Tips

Important:
Grass clippings act as a lubricant
when mowing. Operating the cutting unit
excessively without grass clippings can damage
the cutting unit.
•
Mow the greens in a straight back-and-forth
direction across the green.
•
Avoid circular mowing or turning the machine on
the greens areas to prevent scuffing.
•
Turn the machine off the green by raising the
cutting reel (pushing the handle down) and
performing a tear-shaped turn on the traction drum
(Figure 14).
•
Mow at a normal walking pace. Fast speeds saves
little time and results in an inferior mowing job.
•
To assist in maintaining a straight line across
the green and to keep the machine an equal
distance from the edge of the previous cut, use the
alignment stripes on the basket
17
Figure 14
(Figure 15).
g271799