Operation; Starting The Trimmer - Toro Flex-Force Power System 51830T Operator's Manual

Operation

Starting the Trimmer

1. Make sure that the vents on the trimmer are
clear of any dust and debris.
1. Trimmer venting areas
2. Align the cavity in the battery pack with the
tongue on the handle housing
3. Push the battery pack into the handle until the
battery locks into the latch
1. Battery latch
4. To start the trimmer, squeeze the lockout trigger,
then squeeze the run trigger
Note:
Slide the 2-speed switch to change the
speed of the trimmer.
Figure 9
(Figure 10).
(Figure 10).
Figure 10
(Figure 11).
1. 2-speed switch
2. Lockout trigger
Shutting Off the Trimmer
To shut off the trimmer, release both triggers.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
Removing the Battery Pack
g268141
from the Trimmer
Press the battery latch on the machine to release the
battery pack and slide the battery pack out of the
machine (Figure
1. Battery latch
g268418
13
Figure 11
3. Run trigger
12).
Figure 12
g268420
g268419