Toro Flex-Force Power System 51830T Operator's Manual
14in or 16in 60v max string trimmer
Hide thumbs
Also See for Flex-Force Power System 51830T:
- Operator's manual (21 pages) ,
- Manual (65 pages) ,
- Operator's manual (68 pages)
Table of Contents
Related Manuals for Toro Flex-Force Power System 51830T
Summary of Contents for Toro Flex-Force Power System 51830T
- Page 1 Form No. 3460-809 Rev A Flex-Force Power System ™ 14in or 16in 60V MAX String Trimmer Model No. 51830—Serial No. 323000001 and Up Model No. 51830T—Serial No. 323000001 and Up *3460-809* Register at www.Toro.com. Original Instructions (EN)
- Page 2 1. Model and serial number location This trimmer is intended to be used by residential homeowners to trim grass as needed outdoors. It is designed to use Toro 60V lithium-ion battery packs. Model No. These battery packs are designed to be charged only by Toro 60V lithium-ion battery chargers.
-
Page 3: Safety Alert Symbol
II. Preparation Keep bystanders and children away from the operating area. Use only the battery pack specified by Toro. Using other accessories and attachments may increase the risk of injury and fire. Plugging the battery charger into an outlet that is not 120 V can cause a fire or electric shock. - Page 4 Replace the battery pack with a genuine tool in rain or in damp or wet locations. Toro battery pack only; using another type of Use the proper tool for your application—Using battery pack may cause a fire or risk of injury.
- Page 5 Do not attempt to service or repair the tool, battery pack, or battery charger except as indicated in the instructions. Have an Authorized Service Dealer perform service using identical replacement parts to ensure that the product is safely maintained. Store an idle tool indoors in a place that is dry, secure, and out of the reach of children.
-
Page 6: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal137-9461 137-9461 1. Battery charge status decal137-9454 137-9454 1. Read the Operator’s 3. - Page 7 decal139-5212 139-5212 decal139-5210 139-5210 1. Warning—read the Operator’s Manual; stay away from moving parts; keep all guards in place; wear eye protection; do not operate in wet conditions. decal139-8266 139-8266 decal139-5346 139-5346...
- Page 8 Setup Loose Parts Use the chart below to verify that all parts have been shipped. Procedure Description Qty. Screws (not included) Mount the battery charger (optional). Allen wrench Unfold the handle. Auxiliary handle assembly Install the auxiliary handle. Guard Install the guard. Important: The battery pack is not fully charged when you purchase it.
-
Page 9: Unfolding The Handle
Unfolding the Handle Parts needed for this procedure: Allen wrench Procedure Unfold the handle (A of Figure Align the locking button on the lower shaft with the slotted hole on the upper shaft and slide the 2 shafts together (B and C of Figure Note: The locking button clicks into the slotted hole when the shafts are secured (D of... -
Page 10: Installing The Auxiliary Handle
Installing the Auxiliary Handle Parts needed for this procedure: Auxiliary handle assembly Procedure Separate the auxiliary handle from the handle plate by removing the 4 socket head screws using the provided Allen wrench (A of Figure Line up the auxiliary handle with auxiliary handle plate on the trimmer handle (B of Figure Secure the auxiliary handle to the handle plate with the 4 socket head screws previously removed (C of Figure... -
Page 11: Installing The Guard
Installing the Guard Parts needed for this procedure: Guard Procedure Using the provided Allen wrench, remove the 2 socket head screws, 2 washers, and 2 spacers from the trimmer base (A of Figure Align the guard onto the trimmer base (B of Figure Secure the guard onto the base of the trimmer with the 2 socket head screws, 2 washers, and 2 spacers previously removed (C of... -
Page 12: Product Overview
Contact g425179 your Authorized Service Dealer or authorized Toro Figure 7 distributor or go to www.Toro.com for a list of all approved attachments and accessories. 1. Battery latch 4. Run trigger 2. Lockout trigger 5. -
Page 13: Operation
Operation Starting the Trimmer Make sure that the vents on the trimmer are clear of any dust and debris. g268420 Figure 11 1. 2-speed switch 3. Run trigger 2. Lockout trigger Shutting Off the Trimmer To shut off the trimmer, release both triggers. Whenever you are not using the trimmer or are transporting the trimmer to or from the work area, remove the battery pack. -
Page 14: Charging The Battery Pack
Charging the Battery Pack Refer to the following table to interpret the LED indicator light on the battery charger. Important: The battery pack is not fully charged Indicator Indicates when you purchase it. Before using the tool for light the first time, place the battery pack in the charger No battery pack inserted and charge it until the LED display indicates the battery pack is fully charged. -
Page 15: Advancing The Line Manually
Advancing the Line Using the Bump Feed Run the tool at full throttle. Tap the bump button on the ground to advance the line. The line advances each time the bump button is tapped. Do not hold the bump button on the ground. -
Page 16: Operating Tips
Adjusting the Cutting Swath The trimmer comes from the factory with a cutting swath of 36.6 cm (14 inches) as shown in A of Figure Refer to the following instructions to adjust the swath to 40.6 cm (16 inches) as shown in D of Figure Remove the swath blade from the bottom of the guard by removing the 2 screws holding it in place using the provided Allen wrench (B of... -
Page 17: Maintenance
Replacing the String Important: Use only 2 mm (0.080 inch) diameter monofilament string (Toro Part No. 88611) or 2.4 mm (0.095 inch) diameter twisted monofilament string (Toro Part No. 88202). Remove the battery pack and clean any debris from the trimmer head. -
Page 18: Preparing The Battery Pack For Recycling
Call2Recycle seal, please contact your local municipality for more information on how to responsibly recycle the battery. If you are located outside of the US and Canada, please contact your authorized Toro distributor. -
Page 19: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Always remove the battery from the tool when troubleshooting, inspecting, maintaining, or cleaning the tool. Problem Possible Cause Corrective Action... - Page 20 Problem Possible Cause Corrective Action The LED indicator light on the battery 1. There is an error in the communication 1. Remove the battery pack from the charger is blinking red. between the battery pack and the battery charger, unplug the battery charger.
- Page 21 Notes:...
- Page 22 Notes:...
- Page 23 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.