Sanyo PLC-XR70N Owner's Manual page 19

LAMP REPLACEMENT INDICATOR
Light turns to yellow when the life of a
projection lamp draws to an end.
(Refer to Page 42.)
TEMPERATURE WARNING INDICATOR
Flashes red when internal projector
temperature is too high.
Indicators and Remote Receiver
LAMP WARNING
REPLACE TEMP.
READY LAMP
READY INDICATOR
Light is green when the projector
is ready to be turned on.
REMOTE RECEIVER
Point the Remote Control Units toward
this Receiver when pressing the buttons.
The Operating Range of the Remote Control
Maximum operating range for the Remote Control
is about 16.4' (5m) and 60° front of the projector.
BEFORE OPERATION
LAMP INDICATOR
Light is dim when the projector is
on. And light is brightened
when the projector is in stand-by
mode.
5m
(16.4')
30˚
30˚
5m
(16.4')
19