Preparing The Remote Controls - Sanyo PLC-XR70N Owner's Manual

INSTALLATION

PREPARING THE REMOTE CONTROLS

WIRELESS REMOTE CONTROL UNIT
1 Remove the battery
compartment lid.
WIRELESS/WIRED REMOTE CONTROL UNIT
1 Remove the battery
compartment lid.
OPEN
8
Remote Control Battery Installation
2 Slide the batteries into
the compartment.
Press the lid
downward and
slide it.
For correct polarity (+ and –), be sure
the battery terminals are in contact
with the pins in the compartment.
2 Slide the batteries into
the compartment.
Two AA size
batteries
Press the lid
downward
and slide it.
For correct polarity (+ and –), be sure
the battery terminals are in contact
with the pins in the compartment.
3 Replace the compartment
lid.
Two AA size
batteries
Slide the lid
upward.
3 Replace the compartment
lid.
Slide the lid
OPEN
upward.