Table of Contents
Advertisement
VIDEO MODE
Adjusting the Picture Image
1
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select IMAGE
press the SELECT (REAR CLICK) button. Another dialog box
PICTURE IMAGE ADJUSTMENT Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to
pressing the POINT UP/DOWN buttons. To increase the value,
point the arrow to
button. To decrease the value point the arrow to
press the SELECT (REAR CLICK) button.
Color
Point to
to adjust the image deeper. (From 0 to 63.)
Tint
Point to
to adjust more green. (From 0 to 63.)
Contrast
Point to
to adjust the image deeper. (From 0 to 63.)
Brightness
Point to
to adjust the image brighter. (From 0 to 63.)
sharpness
Point to
adjust the image sharper. (From 0 to 63.)
Reset
Stored
Quit
Normal Function
The normal picture level is preset on this projector by the factory and
can be restored anytime by pressing the NORMAL button (located on
the Front Control or on the Remote Control). The "Normal" display will
be displayed on the screen for a few seconds.
36
PICTURE IMAGE ADJUSTMENT
or
of the item that you want to change by
and then press the SELECT (REAR CLICK)
to adjust the image lighter, and select
to adjust the color more purple, and select
to adjust the image lighter, and select
to adjust the image darker, and select
to adjust the image softer, and select
It recalls the data previously adjusted.
It stores the data in the memory.
It terminates the PICTURE IMAGE ADJUSTMENT
Menu.
and
and then
to
Normal
It indicates the
roughly level of
the item.
Move the arrow to
or
and press
the SELECT (REAR
CLICK) button.
It terminates the
PICTURE IMAGE
ADJUSTMENT Menu.
Advertisement
Table of Contents
