Table of Contents
Advertisement
When the Remote Control Unit cannot be pointed at the Infrared Remote Receiver, connect the
Wired/Wireless Remote Control Unit to the projector with the Remote Control Cable(supplied).
WIRED REMOTE JACK
When using as wired remote
control, connect the remote
cable to this jack.
FINE SYNC BUTTON
Use to adjust fine sync.
VOLUME BUTTON
Used to adjust volume.
MUTE BUTTON
Used to mute sound.
MENU BUTTON
Used to activate the
MENU operation.
SELECT BUTTON
Used to execute the item
selected, or to increase or
decrease the values in certain
items such as CONTRAST or
BRIGHTNESS.
POINT BUTTON
Used to select an item on the
MENU. It is also used to
move the pointer when in use
as a wireless mouse
When using the Wired/Wireless Remote Control Unit as
the Wired Remote Control, Connect the Wired Remote
Control Unit to the R/C JACK with the Remote Control
Cable (supplied).
(The battery installation is required when using the
Wired Remote Control Unit.)
Wireless/Wired Remote Control Unit
VOLUME FINE SYNC.
MUTE
MENU
SELECT
ON-OFF BUTTON
Used to turn the projection
lamp on or off.
PC BUTTON
ON-OFF
Used to select source among
P C
Computer 1 ~ 3.
VIDEO
VIDEO BUTTON
SYSTEM
Used to select source among
Video 1 ~ 3.
FREEZE
SYSTEM BUTTON
Used to select computer
NORMAL
system in computer mode, or
color system in video mode.
FREEZE BUTTON
Used to freeze on-screen
image.
NORMAL BUTTON
Used to reset to normal
picture adjustment preset by
the factory.
Rear Terminal
R/C JACK
BEFORE OPERATION
21
Advertisement
Table of Contents
