(Trained Technicians Only) Install The Wall Mounting Kit - Lenovo 7D2C User Manual

Figure 36. Securing the server
1 Rack release latches
Remove the server from the rack
Figure 37. Removing SR250
① Disconnect all the cables that are connected to the server, and slide the server out until it stops.
② Press the release latches to disengage the inner rails.
③ Remove the server.

(Trained technicians only) Install the wall mounting kit

Follow the instructions in this section to install the wall mounting kit.
2 Front screw
Chapter 6
.
31
Installing optional kits