Lenovo 7D2C User Manual page 32

800mm deep rack cabinet

Hide thumbs Also See for 7D2C:

Table of Contents

Figure 21. Removing compute nodes

① Press on the release button.

② Slide the node out from the enclosure.

Step 6.

Install the rear mounting bracket of the right outer rail to the lower EIA flange.

Figure 22. Installing the rear mounting bracket to the EIA flange

① Align the rear pins on the outer rails to the EIA flange.

② Slightly push the end of the rail down to hook the rear mounting bracket latch to the rack.

③ Push the rail into the EIA flange until the pins protrude through into the corresponding holes

in the rack.

④ The bracket will lock into place as illustrated.

Step 7.

Install the front mounting bracket of the right outer rail to the lower mounting flange.

ThinkSystem Micro DataCenter 6U 800mm Deep Rack Cabinet User Guide

Table of Contents

Thinksystem micro datacenter 6u 7d2p