Table of Contents
Advertisement
Casters
S037
CAUTION:
The weight of this part or unit is more than 55 kg (121.2 lb). It takes specially trained persons, a lifting
device, or both to safely lift this part or unit.
Complete the following steps to move the cabinet to the designated site:
Step 1.
Make sure the leveling feet are all up. If not, complete the following procedure on each of the
leveling feet.
a.
Loosen the nut that fixes the leveling foot.
Figure 6. Loosening the nut
b.
Insert the open end of the combination wrench in the hardware box (see
on page
6) into the screw above the leveling foot, and turn it counterclockwise until it no longer
makes contact with the floor.
Note: Make sure to shorten the cabinet feet enough to allow the cabinet to slide on the ramp
without getting stuck.
in
"Hardware box"
4
.
Chapter 4
Moving the rack cabinet
9
Advertisement
Table of Contents
