Installing The Guard - Toro 66210T Operator's Manual

2

Installing the Guard

Parts needed for this procedure:
1 Rear guard
1 Front guard
1 Socket-head screw
2 Button-head screw
Procedure
1. Align the guard so that the tab on the mount slides into the slot (A of
2. Install and tighten the socket-head screw to secure the guard to the mount (B of
3. Install the front guard to the rear guard using the 2 button head screws
Figure
Figure 4
8
4).
Figure 4).
(Figure 5).
g379323