Usb Host 2.0 Interface; Artik Jtag; Power Jack; Figure 15. Location Of The Usb2.0 Interface Ports On The Platform Board - Samsung ARTIK 530s Manual

Samsung Semiconductor, Inc.

USB Host 2.0 Interface

The Platform board has two USB 2.0 Interfaces. The location of these interfaces is shown in Figure 15.

ARTIK JTAG

The Platform board contains a JTAG port for communication with an external JTAG debugger. This connector is located right next
to the DC power jack.

Power Jack

The Platform board can receive power from the following two sources.
• 5V DC power jack
• Battery
The 5V DC jack is located next to the Ethernet connector as shown in Figure 10. The battery connector is located next
to the power-on switch and can be connected as shown in Figure 16.
Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com. Arrow.com.
Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from Downloaded from

Figure 15. Location of the USB2.0 Interface Ports on the Platform Board

Figure 16. Location of the 5V DC Power Supply Jack on the Platform Board

ARTIK 530s Development Kit
17