Micro-Usb Interface; Jtag Interface - Samsung ARTIK 053s Hardware User's Manual

Samsung Semiconductor, Inc.
Figure 4 shows the location of the power-related connectors on the Starter board.
Battery Connector
(CON706)
Power Jumpers
(CON705)
DC power jack
(CON712)

micro-USB Interface

The Starter board has one micro-USB connector located as shown in Figure 4. The USB port can be used to
program the module.

JTAG Interface

The Starter board provides a JTAG interface that can be used with trace and debugging equipment. In addition to
showing the location of the connector, Figure 5 also shows a JTAG to SWD interface cable/adapter to convert from
the mini-JTAG connector to a common SWD connector used by many trace/debug instruments. The cable/adapter
set shown is available from Adafruit (www.adafruit.com).
JTAG Connector
(CON707)
The pinout of the JTAG connector is shown in Table 5.
2
1
Figure 4. Location of Power Connectors on the Starter Board
1
2
Figure 5. JTAG Connector Location on Starter Board
ARTIK 053s Development Kit Hardware User's Guide
micro-USB port
(CON700)
SWD cable and adapter
9