Table of Contents
Advertisement
Figure 33. Installing the bezel
Add an NVMe expansion enclosure
Take the following actions to add an NVMe expansion enclosure to a running system with existing expansion enclosures.
NOTE:
If this is the first NVMe expansion enclosure, refer to
Summary of tasks for adding an expansion enclosure
To add an expansion enclosure to a running system, complete the tasks below in the order in which they appear. This document
provides instructions for completing each task.
NOTE:
When adding an expansion enclosure to a running system, you must power on the expansion enclosure before
attaching the back-end cables.
1. Verify the contents of the shipping package.
2. Choose the space in the cabinet for the new expansion enclosure.
3. Remove the filler panels that cover the cabinet space for the new expansion enclosure.
4. Install the rails for the new expansion enclosure in the cabinet.
5. Install the expansion enclosure on the rails.
6. Install the cable management arms.
7. Apply cable labels.
8. Route the data cables and power cords through the cable management arms.
9. Attach the power cables to the new expansion enclosure.
10. Close the cable management arms.
11. Test the cable management arms.
12. Plug the power cables into the power source.
13. Attach the expansion (back-end) cables to the new expansion enclosure.
14. If the new expansion enclosure shipped without its drives installed, install the drives in the expansion enclosure.
15. Install the front bezel on the new expansion enclosure.
Verify shipping package contents
Confirm that you received all the equipment that is required to install the new NVMe expansion enclosure.
Verify that you received the following:
40
Install a new base enclosure and an optional expansion enclosure
CL5262
Install an ENS24 expansion
enclosure.
Advertisement
Table of Contents
