Table of Contents
Advertisement
CAUTION:
Improper installation on the rails may damage the rails or cause the system to fall when extended.
5. With the intermediate rails extended, install the system into the extended rails.
Figure 25. Install system into the extended rails
6. Pull the orange slide release lock tabs forward on both the rails, and slide the system into the rack.
Figure 26. Slide system into the rack
Installing cable management arms
About this task
To properly orient the cable management arms, hold them with the silver side facing down. The words "Upper" and "Lower" on
the arms should be legible.
Steps
1. Install the lower cable management arm:
a. On the right-hand side of the rear of the cabinet, align the two retention latches with the two lower rail clips, and insert
them into the clips until you feel and hear an audible click.
2. Install the upper cable management arm:
34
Install a new base enclosure and an optional expansion enclosure
Advertisement
Table of Contents
