ABB IRC5 Startup Manual page 43

ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 11 - Appendix A: Setting Up Forge/OS | 43
a. ‍n the Oettings main screen, tap Network.
b. The table below lists the available network interfaces on your IPC. By default, the first interface is for the
READY pendant. You can't edit the pendant's interface in Forge/‍O. Oelect another interface and tap Edit to
see the network settings.
c. Change the network interface to match the settings in the image below. Connect robots and other devices to
this interface through an Ethernet switch.
d. Tap SAVE.