Chapter 6. Powering On The System - ABB IRC5 Startup Manual
Hide thumbs
Also See for IRC5:
- Operating manual (590 pages) ,
- Product manual (550 pages) ,
- Applications manual (110 pages)
Table of Contents
Advertisement
Chapter 6. Powering On the System
1. Plug the ABB controller into a power source. Follow ABB instructions for powering the ABB controller.
2. Turn the power switch on the ABB controller clockwise to power the controller on.
3. Plug your IPC's power cable into a power outlet.
4. Power on your IPC and other devices.
5. If there are issues, power off each device, disconnect from power supplies, and check your wiring.
Advertisement
Table of Contents
