Table of Contents
Advertisement
g
EV Charging Station
5.50
BASE MOUNTING ASSEMBLY – DURING CONCRETE POUR. ALLOW MIN. 5" CONDUIT LENGTH
Adjust (4) ½-13 nuts to position height as shown in Figure 4.
Pour concrete to level shown in Figure 4. Do not cover the ½-13 nuts with concrete. Remove
mounting template from threaded rods, after concrete has cured. Do not remove the ½-13 nuts as
they are used for leveling the skirt.
GE EV Charging Station User Manual
User Manual & Installation Instructions
Figure 4
ABOVE CONCRETE FLOOR LEVEL
8 of 86
Advertisement
Table of Contents
