Table of Contents
Advertisement
g
EV Charging Station
Locate area for pedestal location
Figure 11
Locate area for double pedestal location.
Install conduits for power wire and communication wire (if required). Allow approximately 5" length for
each conduit above the concrete level as shown in Figure 13. Cut as necessary to final dimensions.
Route power conduit and communication conduit through the center of the hole in the mounting
template, appropriately.
Install base mounting assembly plate securely over conduits with mounting template and four 1/2-13
nuts.
GE EV Charging Station User Manual
CONDUIT
MOUNTING TEMPLATE
CONCRETE
BASE MOUNTING
ASSEMBLY
WARNING: Make sure power to the EVSE is
disconnected before performing any task
User Manual & Installation Instructions
Figure 12
14 of 86
Advertisement
Table of Contents
