GE NEMA User's Manual & Installation Instructions page 72

g
EV Charging Station
Figure 69: Network Settings Option 1 (See the Configuration Server Interface section)
Click the Radio button to "Use the following IP Address" and then enter both the IP address and
Subnet mask as shown.
Set the Ethernet IP address, Subnet Mask, and Default Gateway to the following settings:
Click on OK and close both windows to save your settings.
Note: The IP address above must match the Host IP address entered in the
configuration page of all connected EVSE. By default, this is 192.168.2.19.
Note: Reboot PC to finalize with the configuration.
GE EV Charging Station User Manual
Host IP Address
Host Subnet Mask
Host Default Gateway
User Manual & Installation Instructions
192.168.2.19
255.255.255.0
Leave Blank
72 of 86