Installation
Device connection
NOTE
∙
When using more than two SLEEPsenses, check the mac
information on the label on the back of your SLEEPsenses
and then select the relevant information for each.
-
The MAC information consists of 12 alphanumeric
characters and check the 6 characters in the back in
order to identify the device.
∙
Make sure to connect Bluetooth through the app.
6.
Hold the SLEEPsense with the logo facing up.
7.
Place the SLEEPsense under your mattress.
8.
Position the SLEEPsense so that it will rest below your external shoulder/chest area, as shown in the
illustration.
NOTE
For placing the sensor in additional setups, please refer to the guide on page 20
18