PV+ESS+Charger Solution
User Manual
5.5 RFID Card Management
You can add or delete RFID cards and query the RFID card list on the FusionSolar
app. After adding an RFID card and enabling identity authentication, you can start
or stop charging by swiping the RFID card.
Adding an RFID Card
1.
2.
3.
Issue 02 (2023-01-13)
NO TE
If you swipe your card in the swipe protection state, the swipe protection time will start
again.
NO TE
Before using an RFID card, choose Settings > Advanced Settings > Identity
Authentication, and enable Identity Authentication. For details about the Identity
Authentication, see
Identity
Connect to a
charger.
On the Charger screen, choose Settings > Card management.
In the upper right corner of the Card Management screen, tap
select a card adding mode.
–
Swiping
i.
After the indicator blinks white fast twice, place the ring pattern on
the RFID card in the swiping area. If the indicator is steady white for
5s, the card is successfully swiped.
ii.
Enter the user-defined card name and tap Confirm.
Copyright © Huawei Technologies Co., Ltd.
Authentication.
5 Maintenance
and
74