Start Charging Through Bluetooth Authentication - Huawei PV+ESS+Charger Solution User Manual

Table of Contents

PV+ESS+Charger Solution

User Manual

If the indicator on the charger turns blue on and off cyclically (on for 0.5s and off

for 0.5s), the charger is in the charging state. If the indicator is pulsating blue for

4s and off for 1s cyclically, the charger is in the scheduled charging waiting state.

Stopping Charging

After the vehicle is fully charged, the charger automatically stops charging. In this

case, the indicator is steady blue. You can also touch and hold

to stop charging.

4.5.4 Start Charging Through Bluetooth Authentication

Complete the Bluetooth pairing of the charger on the FusionSolar app. Ensure that

the app is running and the Bluetooth function of the phone is enabled. When the

phone is close to the charger, the identity authentication is automatically

completed and the charging starts.

Precautions

●

Issue 02 (2023-01-13)

Insert the charging connector completely into the charger and the charging

port of a vehicle. If the indicator on the charger turns blue on and off

cyclically (on for 4s and off for 1s), the charger is successfully connected to

the vehicle.

When you use the Bluetooth authentication function for the first time, enable

the Bluetooth function on your phone. Log in to the FusionSolar app as an

owner, and enable Authentication via Bluetooth on the charger settings

screen to perform Bluetooth pairing.

4 System Commissioning

on the app

Table of Contents