Table of Contents
Advertisement
Operating the Video Display
Changing Image Quality Automatically According to Input Signal
On this video display, you can automatically change the image quality according to video resolution or metadata.
Changing [Picture Mode] automatically (
8
1 Select
[Channel Settings]
• Select the channel.
2 Select
[Channel Settings]
3 Select the Type using the jog dial.
Changing by individual video resolution (4K/2K)
Select [4K/2K].
Changing according to video resolution (4K/2K) or metadata (SDI)
Select [Automatic].
4 Select the Picture Mode.
Changing the image quality setting according to video metadata (HDMI) (
1 Select
[Adjustment]
2 Select
[Adjustment]
• Select [On].
• See [HDMI Link] (
Note
• When automatic changing of image quality according to video resolution (4K/2K) or SDI metadata is set,
information showing which resolution (4K/2K, etc.) is selected will be displayed at the top right of the
menu screen.
Changing the screen display area
When 4096x2160 video signal is input, the left and right sides of the image will be cropped to display an area of
3840x2160. The cropped sides can then be further adjusted on the left and right.
1
Select [Display Settings]
• Select [Native Input Resolution] or [200%].
2 Press the jog dial (
• Shifts to the left or right.
[Select Channel].
[Picture Mode]
[Picture Mode]
[Detail Settings]
30) for the configurable settings.
[Screen Scaling].
) while the OSD menu is closed.
39)
[Type].
[User 1] - [User 9].
[HDMI Link]
[Automatic Adjustment].
30)
Advertisement
Table of Contents
