Use A Web Browser To Remotely Operate The Video Display - Canon DP-V2730 Operation Manual

Operating the Video Display

Use a web browser to remotely operate the video display

Operate the video display remotely using a web browser on a computer terminal or other device connected to the LAN
terminal. From the device connected to the network, you can change image quality settings or switch channels.
This function checks operation using the following web browsers.
18
• Safari (Apple)
• Google Chrome (Google)
* Correct operation cannot be guaranteed on all supported OS or web browser editions.
CAUTION
• Remember to change the default settings for ID and Password when using this function.
Note
• Access is only possible from a single terminal.
• Opening multiple pages in multiple tabs on the web browser can cause it to not function properly.
• Operating the video display itself while it is being accessed from a web browser can cause the network connection to be lost.
• A delay may occur in video display or in the various settings depending on the network environment and communication
conditions.
• The IP address can be checked in the [System Information] screen.
• The operation screen only displays English.
1 Connect external control devices via the network.
2 Select
3 Select [Control]
4 Select [User ID] and [Password] (
• [User ID]: Enter the user ID. This is set using up to 16 alpha-numerical characters and symbols.
[Password]: Enter the password. This is set using between 8 and 16 alpha-numerical characters and symbols.
The following characters can be entered.
Alphanumeric characters: A to Z, a to z, 0 to 9
Symbols: _ or -
5 Start up a web browser on the device connected to a network.
6 Enter the IP address of this video display in the address bar.
• The remote operation screen is displayed on the web browser.
• When the basic authentication screen is displayed, enter the user ID and password.
7 When operation ends, close the web browser.
[Network/IMD Settings]
[On].
68).
[Web].