Canon DP-V2730 Operation Manual page 27

Sub Menu
Detail Settings
CDL Export
CDL Preset CDL 1 to CDL 8
All
File Type CCC, CDL
Execute
CDL Import
Filename
CDL Preset CDL 1 to CDL 8
Execute
CDL Preset Name
Anchor CDL
Reset CDL
l When [User LUT 1-8] is selected
Select a preset of the LUT.
LUT Import
LUT Name
LUT Delete
Color Range Automatic, Manual
Input Limited to Full, Off
Output Full to Limited, Off
Setting Options (Bold: factory default)
Exports CDL parameters.
Imports CDL parameters.
You can change the name of [CDL 1-8] within 16 characters including
alphabetical characters, numbers, and symbols.
You can temporarily save parameters for [Power], [Saturation], [Offset],
and [Slope] and recover the values. (anchor point setting)
Resets CDL parameters.
Same as [Detail Settings] [LUT Import], [LUT Name], [LUT Delete]
( 28)
Sets the method of color range conversion performed before and after
User LUT processing (input/output).
[Automatic]: The color range is automatically converted before and after
User LUT processing (input/output).
-
When [Color Range] [Limited] (
Full]. [Output] is set to [Full to Limited].
-
When [Color Range] [Full] (
* [SDI Full (4-1019)] is included.
[Manual]: Sets [Input] or [Output].
When [Color Range] [Manual]
Sets the method of range conversion performed before User LUT
processing.
[Limited to Full]: Performs the process for converting to [Full].
[Off]: The color range is not converted.
When [Color Range] [Manual]
Sets the method of range conversion performed after User LUT
processing.
[Full to Limited]: Performs the process for converting to [Limited].
[Off]: The color range is not converted.
OSD Menu
25): [Input] is set to [Limited to
25)*: [Input] and [Output] are set to [Off].
27