Canon DP-V2730 Operation Manual page 25

Sub Menu
Color Range
Output Transform
Output Transform Surround Dim Surround
Automatic Sets the quantization range.
Full
SDI Full (4-1019) [Automatic]: Sets the range based on signal information automatically.
Limited
• Setting is disabled when [ACESproxy (ver. 1.0.1)] is selected for [Picture Mode].
• Operations when [Automatic] is selected are described below.
- It is set in accordance with the settings if Color Range settings are included in
- When HDMI is selected, [Full] or [Limited] is set automatically depending on
- When SDI is selected, the setting is configured according to the settings for
-
• Operations when [Format] is set to [ICtCp] are described below.
- When [Color Range] is set to an option other than [Full], [Wave Form Monitor]
ITU-R BT.709 When [Picture Mode] [ACESproxy (ver. 1.0.1)]
ITU-R BT.2020
DCI-P3 [ITU-R BT.709], [ITU-R BT.2020], [DCI-P3]: ACESproxy is converted into
When [Picture Mode] [ACESproxy (ver. 1.0.1)]
Dark Surround
[Dim Surround]: Enables Dim Surround process specified by ACESproxy.
[Dark Surround]: Enables Dark Surround process specified by ACESproxy.
Setting Options (Bold: factory default)
the camera metadata. When there is [Full Range] metadata in Payload when
SDI is selected, it will be set to [SDI Full].
HDMI signal information.
[Picture Mode], [Color Gamut], and [Gamma/EOTF] (
When [Channel Settings] [Input Configuration] [Multi View] is selected,
none of camera metadata, SDI Payload, and HDMI signal information are
linked.
will display only a signal set with [Color Range].
respective mode.
OSD Menu
25
32).