Canon DP-V2730 Operation Manual page 72

OSD Menu
Sub Menu
Power Indicator/Button LED Settings
Power Indicator
Brightness
72
Display Button LED
Button Name Lighting
Time
Firmware/License Update
1
Export/Import
Export
Target
Filename
Execute
Import
Target
Filename
Settings
Execute
Off Adjusts the brightness of the power indicator on the main unit. The greater
1 to 5 (3) the number, the higher the brightness.
On, Off Sets the F buttons and the lamp on the face.
Always, 60 sec., Sets the time (sec) until the lamp on the face goes out, if no operation is
30 sec., 10 sec., 5 sec. performed.
[Always]: The lamp on the face is always lit.
This function is used to update the video display firmware. Refer to the Canon website for detailed
information.
Sets the export/import OSD menu settings.
USB Select the export destination.
User 1 to User 3
LAN [USB]: Export to a USB memory.
[User 1] to [User 3]: Export to the built-in memory of the main unit.
[LAN]: Exports to a display connected via LAN.
When [Target] [USB]
Factory default is "dinfo_dpv****.dat" (****: number of the product name).
You can change the name of the file to be exported to the USB memory
within 16 one-byte characters including alphabetical characters, numbers,
and symbols.
Performs export.
USB Specify the save destination for the file to be imported.
User 1 to User 3
Displays files with the extension ".dat" so you can select from among
them.
All Select the settings to import.
Adjustment
Channel Settings
Display Settings
Audio Settings
Marker Settings
Function/Network/
System Settings
Performs import.
Setting Options (Bold: factory default)