Table of Contents
Advertisement
How to Recharge the Portable ROM Player
The portable ROM Player operates on a battery pack w hich contains rechargeable Lithium ion batteries.
Batteries should be recharged for m ore than three hours before use.
How to Recharge the Portable ROM Player
1
Connect the pow er cord.
Charger
(XA-GC20BK)
• There is no pow er
sw itch on the
Charger.
• Place on a level and
flat surface.
2
Insert the Portable ROM Player. The display w indow should be facing tow ards
you.
Portable ROM
Player
(XA-GP1BK)
Downloaded from:
https://www.usersmanualguide.com/
2
1
Connect the pow er cord to the
AC IN jack.
Recharge
indicator
Plug the pow er cord plug into a
standard household pow er outlet.
When pow er cord is plugged in, the heat
ventilation fan begins to operate.
• A maximum of 20 units can be recharged at one
time.
The Portable ROM Player should be recharged w ith
the POWER turned OFF. The am ount of tim e
necessary to recharge the batteries becom es
slightly longer w hen the POWER is left ON.
• About 3 hours is required to fully recharge the
batteries.
Even w hen the Portable ROM Player is left in the
recharger, it is not possible for the batteries to
becom e over charged.
• Recharge indicator
The battery level is indicated by the color of the
light.
Note
• Take precautions to install the Charger m ore than
10 cm from a w all or other objects. This assures
that the unit can be adequately cooled during
operation.
AC110-240V
50/ 60Hz
(Pow er outlet
that is alw ays
supplied w ith
a continuous
current.)
Pow er cord (included w ith the
Charger)
Only use the indicated pow er cord.
Red
: Less than 60% of
recharging has taken
place.
Green
: The batteries are m ore
than 60% recharged.
Even w hen the batteries
becom e com pletely
recharged, the indicator
light stays on.
7
Advertisement
Table of Contents
