Table of Contents
Advertisement
Setup
Installing the Forks
1.
Hang the upper hook of the fork over the center
of the frame and insert the bottom hook through
the bottom notch.
2.
Pull up the knob and slide the fork to the desired
location. Release the knob.
3.
Repeat the procedure for the other fork.
Figure 3
Figure 4
Product Overview
1. Fork
2. Adjustable-forks frame
Specifications
Note:
Specifications and design are subject to
change without notice.
Dimensions
g372887
Overall width
Overall length
Overall height
Weight
Fork length
Fork cross-section size
Fork width adjustment range
(outside to outside dimensions)
Load Rating Capacity (per SAE J1197)
TX 1000
TX 1300—Loader arms
retracted
TX 1300—Loader arms
extended
All other models
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
g372889
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
6
Figure 5
3. Upper frame
91 cm (36 inches)
121 cm (48 inches)
75 cm (30 inches)
111 kg (244 lb)
91 cm (36 inches)
7.5 x 2.5 cm (3.0 x 1 inches)
29 to 79 cm (11 to 31 inches)
272 kg (600 lb)
408 kg (900 lb)
226 kg (500 lb)
99 kg (220 lb)
g373061
Advertisement
Table of Contents
