Driven Clutch Disassembly / Inspection - Polaris RZR XP Turbo Service Manual

PVT SYSTEM
DRIVEN CLUTCH DISASSEMBLY /
INSPECTION
q
1. Inspect the bearing
should not have deep scratches or show excessive
wear.
2. Before taking the clutch apart, be sure to mark the
stationary sheave, moveable sheave, helix and cover
with a reference mark.
3. Place the driven clutch in a clutch compression tool.
4. Remove the three fasteners
clutch cover.
5.16
on the helix cover. The bearing
w
retaining the driven
5. Lift and remove the helix
t
spring from the driven clutch.
6. Inspect the buttons surface for wear / cracking. If
replacement is required, remove the fasteners
retaining the buttons to the driven clutch.
7. Separate the moveable sheave from the stationary
sheave.
u
8. Inspect the sliders
wear and cracking. If replacement is required,
remove the fasteners
sheave.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
e r
, limiter spacer
in the stationary sheave for
i
retaining the sliders to the
© Copyright Polaris Industries Inc.
and
y