Engine Removal - Polaris RZR XP Turbo Service Manual

ENGINE / COOLING SYSTEM

ENGINE REMOVAL

1. Disconnect the battery.
2. Drain coolant and engine oil. SeeEngine Oil and Filter
Change, page 2.29 and Coolant Flush, page 2.37.
3. Remove rear fender flairs and fenders.
4. Remove rear fascia.
5. Remove rear cab frame.
6. Remove cargo box.
7. Remove cargo box brackets. exhaust shields on
passenger side, wire/hose clamps
8. Disconnect ignition coil.
9. Disconnect and remove the oxygen sensor
10. Remove the three fasteners
the exhaust pipe.
3.42
q
on driver's side.
w
.
e
retaining the muffler to
11. Remove two fasteners
shield above O2 sensor.
12. Remove the four fasteners
shield above the valve cover.
Front fasteners are plastic rivets and rear fasteners are
bolt/washer/nut.
13. Remove the two fasteners
to the exhaust pipe / turbo joint.
9928491 R04 - 2017-2018 RZR XP Turbo / XP4 Turbo Service Manual
r
retaining the engine heat
t
retaining the heat
NOTE
y
retaining the heat shield
© Copyright Polaris Industries Inc.